Assessment of Flaking

BS 3900-H5 : ISO 4628/5

 Flaking

Scope and Field of Application

BS 3900-H5 and ISO 4628/5 are alternative names for the same method. It is one of a series of methods of designating the quantity and size of common types defects in paint coatings. Other methods in this series deal with the assessment of blistering, chalking, cracking and rusting.

There are no pass/fail criteria defined in the standard. This is a matter of agreement between the parties concerned.

The actual standard is a copyright-protected document and we are not able to provide you with copies. If required however, you can easily obtain copies from the British Standards Institution.

Summary of Method

It is important to emphasise that the standard describes a method of assessing flaking. It is not a method for testing the resistance of a coating to flaking. If you need to test for resistance to flaking before weathering, then please refer to our adhesion test page. If you wish to assess the effect of weathering on flaking, you should visit our durability test pages. We will of course be pleased to advise on the most appropriate test for your samples.

The standard is basically a collection of drawings of flaked surfaces showing both linear and random flaking that vary in size and density. The sample is compared with these drawings and given the rating of the drawing that bear the closest resemblance.

The standard also includes a tables which enables you to rate the size of the flaked area on a six-point scale ranging from no flakes visible under x 10 magnification to ones that are larger than 30 mm.

Sample Requirements

This assessment is normally carried out using test panels that have been subject to some form of durability testing and the panel size and number will have been selected for that purpose. Basically all we need is a representative test piece with an area for assessment of at least 100 x 100 mm.

Accreditation

PRA is accredited to ISO 17025 by the United Kingdom Accreditation Service (UKAS) to carry out this test.

 

Please contact Peter Collins for further details.

 

Back to Paint Testing Laboratory Page

Back to Testing Applied Paint Films Page

Back to top of page